Rubber

VULCOFAC® TMTD MB80N

VULCOFAC® TMTD MB80N is an accelerator which can used as both primary or secondary (ultra) accelerator in multiple blend accelerator systems with thiazoles and sulfenamides. It is also used as a vulcanizing agent (Sulphur donor) in most of the sulfur cured elastomers. Shelf life: 12 months.Benefits:Functions as granulated masterbatch which contains pre-dispersed rubber chemicalsIt is virtually dust-free which enables clean and safe handlingActs as a scorch retarder without affecting the cure speed in mercaptan modified polychloroprene cured with ETU and TMTDOffers improved handling and mixing propertiesEnsures rapid mixing and good dispersion in a wide range of elastomersExhibits excellent flow properties which provides optimal results in automatic dosing systemsProvides fast vulcanization and an excellent vulcanization plateauWhen used in sulfurless vulcanization systems and EV systems, it also offers good heat aging and compression set resistance

VULCOFAC® MBTS MB75N

VULCOFAC® MBTS MB75N is a primary accelerator suitable for rubber applications. It also functions as granulated masterbatch which contains pre-dispersed rubber chemicals. Shelf life: 12 months.Benefits:Acts as scorch retarder in non-sulfur modified polychloropreneOffers improved handling and mixing propertiesEnsures rapid mixing and good dispersion in a wide range of elastomersExhibits excellent flow properties which provides optimal results in automatic dosing systemsIt is virtually dust-free which enables clean and safe handlingIt can be used as an alternative when MBT is too scorcyHas slightly better aging and reversion resistanceProvides medium fast curingIt also offers moderate processing safety and moderately fast cures with a flat plateauIt can be boosted by the use of secondary accelerators to achieve a faster cure and a higher modulusTypical Applications:Ideal for all sulfur curable elastomers.

VULCOFAC® TBZTD MB70N

VULCOFAC® TBZTD MB70N is a primary and secondary accelerator suitable for rubber curing. Shelf life: 12 months.Benefits:Acts as a fast-curing, sulfur donor materialIt is dust-free and shows excellent flow propertiesIt is a masterbatch containing pre-dispersed rubber chemicalsEnsures rapid mixing and good dispersionEnables clean and safe handlingOffers optimal results in automatic dosing systemsTypical Applications:Recommended for NR, SBR and NBR elastomers.

Silopren™ LSR Topcoat TP 3719

Silopren™ LSR Topcoat TP 3719 is a two-component, translucent matt coating designed for spray application.Benefits:Offers excellent adhesion to silicone substrates, high reactivity, and a neutral odor and tasteProvides excellent stability and flexibility at low temperatures, along with good rubber-like properties and abrasion resistanceIt vulcanizes quickly through heat treatment in a ventilated hot-air ovenThe surfaces to be coated are free of dust and grease and require no further pre-treatmentTypical Applications:Suitable for Silopren LSR as well as post-cured high-consistency rubber (HCR)/high-temperature vulcanizing (HTV) applications.

MICA-MU™ 247

MICA-MU™ 247 is a muscovite filler suitable for rubber applications.

LUZENAC MC25

LUZENAC MC25 is a lamellar talc suitable for rubber applications.Benefits:It is used to reinforce polypropylene compoundOffers good mechanical and thermal properties

LUZENAC 20M0

LUZENAC 20M0 is a fine, lamellar talc suitable for rubber applications.Benefits:It is used to reinforce polypropylene compoundProvides good mechanical and thermal properties

THIXON™ P-11-DX

THIXON™ P-11-DX is a solvent-based rubber-to-substrate bonding agent for polar elastomers (NBR and ACM). It is also used as a one-coat adhesive. Shelf life: 720 days.Benefits:Formulated with reactive polymers and pigments in a MEK and xylene-based systemIt is an MIBK-free primer designed for use with MEGUM™ or THIXON™ cover coatsFree from reportable levels of lead and toxic heavy metals