Plastics

TECODUR® PB70 NL HS

TECODUR® PB70 NL HS is a polybutylene terephthalate (PBT) compound.Benefits:It is unfilledIt is heat stabilized and natural in colorUL 94, flame rated HB at 0.75 and 1.6 mm

Polycarbonate 6 (PA 6) is suitable for plastic applications.Benefits:It is a molybdenum disulfide (MoSo2) lubricated gradeUL 94, flame rated HB at 0.75 and 1.6 mm

POKETONE® M630F-UV

POKETONE® M630F-UV is a UV-reinforced, general-purpose polyketone grade suitable for injection molding.Benefits:Offers good UV resistanceIt has low GWPUSP Class VI and RoHs certifiedHalogen and PAHs-freeSVHC compliantUL 94, flame rated HB at 0.8 mmTypical Applications:Recommended for rollers, agricultural equipment and railway component applications.

POKETONE® M630F

POKETONE® M630F is a general purpose, aliphatic polyketone grade suitable for injection molding.Benefits:Classified as an engineering thermoplastic, due to mechanical propertiesExhibits excellent balance of stiffness and toughness over a broad temperature rangeOffers high resilience and good wear resistanceHas very good processability and good impact resistance with good creep performanceIt can withstand short-term exposure to elevated temperaturesProvides high resistance to hydrocarbons, solvents, salt solutions, weak acids and weak basesEasy to process on standard injection molding equipmentIt generally has short cycle timeShows good mold definition with glossy mar-resistant surfacesTypical Applications:Ideal for industrial and consumer appliance market. It is also suitable for water related part and food contact applications.

Elvax 240W

Elvax™ 240W is an ethylene-vinyl acetate copolymer. It is applicable for compounding, sheet & shape extrusion, adhesives, sealants and wax blends.Benefits:Contains "W" amide additive to improve pellet handlingIt has butylated hydroxytoluene (BHT) antioxidant as thermal stabilizerAlso suitable for processing by compression-, blow-, injection- and structural foam moldingComplies with FDA 21 CFR 177.1350(a)(1) regulationTypical Applications:Ideal for industrial applications.

TECOMID® NC40 GR30 NL XA68

TECOMID® NC40 GR30 NL XA68 is a polyamide (PA) 6-6/6 grade.Benefits:Filled with 30% glass fiberIt is natural, heat stabilized and flame retardantHalogen- and red phosphorus-freeUL 94, flame rated V0 at 1.6 mm and 3.2 mm

TECOLEN® OE20 BK111 EC 0F

Polyethylene possibly used for metal replacement, automotive, conductive and daily life applications.Benefits:Provides very good chemical resistanceExcellent impact resistanceExhibits easy processing, low moisture absorption and density

Soleic® TPU 1295A

Soleic® TPU 1295A is an aromatic polyester-based thermoplastic polyurethane (TPU).Benefits:Offers good mechanical properties, high flexibility and high abrasion resistanceIt is suitable for processing by injection molding, filament extrusion, 3D printing and film extrusionIt is >58% bio-basedUSDA BioPreferred and biodegradable